Contact Us Today for All of Your Masonry Needs!

A practical guide to brick installation covering dimensions, dimensional variation, mortar joints, IRA, handling, and proper cleaning methods.

How to Install Brick: Why Understanding the Product Matters

The Importance on Knowing How to Install Brick

Brick installation is not a one-size-fits-all process. Differences in brick size, dimensional variation, suction, texture, finish, and manufacturer requirements can affect how masonry is laid, jointed, handled, and cleaned.

Understanding the characteristics of a specific brick before installation can help masons plan courses accurately, maintain consistent joints, minimize unnecessary cuts, and avoid preventable cleaning or appearance issues.

 

 

Key Takeaways

  • Know the actual dimensions: Brick length, height, and depth, together with mortar-joint thickness, determine masonry layout and course alignment.
  • Protect the brick surface: Texture and finish can affect susceptibility to scratches, chips, mortar staining, and handling marks.
  • Use the correct cleaning method: Cleaning solutions and pressure levels should be appropriate for the specific brick and mortar system.
  • Plan before installation: Reviewing manufacturer information and project specifications before laying the first course can help prevent layout, jointing, handling, and cleaning problems.

1. Measure the Actual Brick Dimensions

Nominal brick size does not always represent the product’s exact dimensions. The brick’s actual length, height, and depth, combined with the specified mortar joint, determine the layout of the masonry.

Accurate measurements are particularly important around:

  • Windows and doors
  • Corners and returns
  • Wall transitions
  • Changes in masonry elevation
  • Connections to adjacent materials

Brick depth can also affect detailing where masonry meets framing, trim, or other building materials.

Special shapes, including corner and return units, may not be available for every brick product. Confirm product availability before finalizing the masonry layout.

2. Account for Dimensional Variation

Individual brick units can vary in size and shape. Some products are manufactured with tight dimensional tolerances, while others intentionally incorporate greater variation to create a particular architectural appearance.

Dimensional variation can influence mortar joint consistency, course alignment, and installation technique. It does not necessarily indicate a product defect; the expected range should be identified before installation.

Review the manufacturer’s stated tolerances and inspect the delivered material before establishing the final jointing approach.

3. Understand Brick Suction and Water Absorption

Initial rate of absorption (IRA) describes how quickly a dry brick absorbs water when it first contacts water. It is different from total water absorption, which measures the amount of water a brick can absorb over a longer period.

IRA can affect the interaction between brick and mortar during installation. A brick with a higher initial absorption rate may draw moisture from mortar more quickly than a product with a lower rate.

Mortar characteristics, temperature, humidity, wind, and other job-site conditions also affect mortar behavior.

Brick should not be wetted automatically based on general practice. Follow the product manufacturer’s recommendations, project specifications, and applicable masonry guidance when determining whether pre-wetting is appropriate.

4. Consider Brick Texture and Finish

Brick texture and finish can affect handling and the appearance of the completed wall.

Smooth, coated, glazed, or specially finished brick surfaces may be more susceptible to visible scratches, chips, mortar smears, or other handling marks. Proper storage and handling can help protect the finished surface.

Keep brick elevated from standing water and protect it from conditions that could cause staining or contamination. Always check the manufacturer’s handling and storage requirements for specialty brick products.

5. Use the Correct Brick Cleaning Method

Brick cleaning is product-specific. The appropriate method depends on the brick, mortar, joint profile, type of residue, and condition of the masonry.

A cleaning solution or pressure level that is appropriate for one brick may damage another. Chemical cleaners and pressurized water should be used only in accordance with manufacturer recommendations and applicable masonry guidance.

The Brick Industry Association’s Technical Note 20 recommends testing a proposed cleaning method on a small, inconspicuous area before cleaning the entire wall. Allow the test area to dry completely so the results can be evaluated accurately.

Preventing excessive mortar and other materials from accumulating on the brick face during installation can also reduce the need for aggressive cleaning.

Why Product Knowledge Matters When Installing Brick

Successful brick installation begins before the first course is laid. Understanding the actual product dimensions, dimensional tolerances, IRA, surface characteristics, handling requirements, and cleaning recommendations allows installers to adapt their methods to the specific brick.

Rather than treating every brick product the same, review the manufacturer’s technical information and project specifications before installation. Proper planning can improve brick layout, mortar joints, handling, cleaning, and overall masonry appearance.

 

Click Here for the Source of the Information.

 


Ready for a Consultation?

  • This field is for validation purposes and should be left unchanged.
    By checking this box, you say that you do not wish to receive this information.